Announcement

Collapse
No announcement yet.

What are the effects of improper installation of resin cutting blades?

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • What are the effects of improper installation of resin cutting blades?

    Click image for larger version

Name:	5-inch-low-price-disc-for-metal.jpg
Views:	10
Size:	52.3 KB
ID:	2051

    low price disc for metal


    The most important point of using the resin cutting piece is that it is installed and installed, and its working efficiency will be high. However, if the installation is not good, it will have an impact on its use. Let's take a look at the minor effects of the improper installation of resin cutting sheets.
    1. Bridge: It is also a film. When the low price disc for metal is running at high speed, the trajectory cannot be straight, and the direct result is that the material after cutting has a slanting flaw, which may not meet the processing requirements.
    2. Shock: This is because when the cutting piece is running at high speed, the vibration is severe when the handle is held, the cutting efficiency is lowered, and waste is caused. The reason is caused by the imbalance of the cutting piece.
    3, it will crack, broken: This is due to the inferior quality of the mesh, the amount of binder is too small or expired, the temperature of the furnace is too low, etc., causing cracks in the cutting piece during high-speed operation, and crushing injury in severe cases. people.
Working...
X